Pelletized - III

October 13, 2008 by Dick.

Oooh, my back is gonna hurt tonight.

We bought a Quadra Fire Santa Fe pellet stove in Massachusetts. Then we drove it home. Then we had to move our existing “heating appliances” around to make room. See, we already had a Vermont Castings Vigilant in the great room and a cast iron “Franklin” stove in the parlor.

I over-engineered moving the Vigilant and thought that might take care of setting a new stove in place as well: attach a couple of 2×4s under the body, rig a cable or chain cradle, rent a pneumatic-rubber tired engine hoist, and simply roll it into place.

Oops. The feet of the hoist have to go under the body and the raised hearth in the parlor knocked that idea out. Not to mention that engine hoists have solid wheels.

The good news is that I have an engine dolly that is strong enough for two stoves and is just about the right height. The coal stove sits on it, awaiting a buyer. Rocking the coal stove turned out to be pretty easy. I lifted one end (the light one) and our son-in-law blocked the feet. He lifted the heavy end while I blocked the other feet. And the dolly slid right out. First time I’ve seen it in 20 years.

I disconnected and moved the server tower to make room in the front hall. Moved some furniture out of the way. Rolled up the rugs.

The Franklin stove weighs about 400 pounds. We tipped it to take off its feet and lowered it on to a pair of “one-by” fir strips. Slid it across the fir onto the dolly. Rolled the dolly onto the front porch. Drove up in the tractor and just lifted it off the dolly and put it down in the barn. It was waaaaaaay easier than it had any right to be.

The Vigilant was already up on 8″ blocks, so we lifted it to add a 2×6 and a 1×6 under each pair of feet. That brought it even with the top of the dolly so we simply “walked it” over. Backed and filled a bit with the dolly to get to the parlor hearth which turned out to be exactly the same height as the dolly. This was also remarkably easy.

We took one enclosure panel off, backed up the truck to the porch, and lifted the new-to-us Quadra Fire Santa Fe pellet stove down off the tailgate. I opted not to carry it in, so I did get to use my brand new, pneumatic tired hand truck. (As an aside, if you know who has my old red hand truck, let me know. I stole it fair and square 30 years ago and I want it back.) I rolled the stove right around the great room furniture and Bob’s yer uncle. It is sitting on the hearth right now.

We have moved all the furniture back that we moved out of the way and reconnected the server tower.

The next decision point was whether to sit it directly on the hearth or raise it another 8″ so its vent will go straight in to the chimney thimble. It was a looks v. convenience v. efficiency question. We opted for floor height and connected it up. It looks and works just fine.

I lied, though. My back already hurts.

Know anybody who wants to buy a nice Franklin stove or an even nicer Home Comfort coal stove?

Next up: Buying pellets. That turns out to be a trip in itself.

Posted in Heating Issues, Seasonal, Random Access | 1 Comment »